- 29 -
Preparation of the device
•
Before using the device, remove the lid and carrying ring, remove the stainless
steel insert pot and clean all parts thoroughly following the instructions in section
6 „Cleaning“.
•
Pour the water into the outer pot only up to „MAX“ mark. Never pour more water
to the other pot, as otherwise it may spill out when the insert pot is placed inside
the outer pot. Make sure that the water level is not below the „MIN“ mark.
CAUTION!
Do not turn on or use the soup kettle when the outer pot is empty / dry.
NOTE!
To reduce heating time, you may use warm water. This saves time
and energy!
Filling in food products and maintaining their temperature
•
Fill the stainless steel insert pot with the desired food warm food products and
place it through the center of the carrying ring (fig. B1).
•
Using the carrying ring place the stainless steel insert pot inside the outer pot
(fig. B3-B4).
•
Place the lid on the soup kettle (fig. B5-B6).
