GENESIS (Model LT3140) – Technical Manual
Max Program Temperature
Enter the top temperature the kiln is rated for. Set the Max Program Temperature to the maximum
temperature rating for the kiln. Check the side of the kiln or the kiln’s manual for its temperature rating.
The max setting is 2400°F (1316°C).
Max Board Temperature
Set the maximum temperature the circuit board can reach. Valid temperature are 0 - 250°F. If the
board reached a temperature higher than 250°F, it can cause serious damage to the circuit board.
SSR Mode
SSR Mode can be turned on when solid state relays are being used on the kiln. When SSR mode
is turned on, it cycles the relays at 500 millisecond intervals. This works the same with either 60hz or
50hz systems.
Cycle Time
Sets the output cycle time. The cycle time is the length of time between an output coming on two
consecutive times. If the cycle time is set for 14 seconds the output will come on every 14 seconds as
needed. Cycle time can be set from 10 seconds to 60 seconds. To change the cycle time in the Factory
Configuration Menu, press “5-Cycle Time”, type in the new time, and press “SAVE”.
Current Sensor Rating
The Current Sensor Rating is used to set the number of Amps that will generate a 5V output from
a current sensor. Factory default is 50 Amps.
Run Factory Diag.
This is used by the kiln manufacturer. The factory diagnostics can be used for comparison when
future diagnostics tests are ran. To view the amperages and voltages from the Factory Diagnostics test,
press the “MENU” button, “1-Data Menu”, then “3-Factory Diagnostic” to view the results.
Rotate Display
When set to on, the display will rotate 180 degrees. To rotate the screen, press “On” and then
press “Save”.
Output Config.
Mini Version
Use to switch screen formatting from larger Genesis screen to the smaller Genesis Mini screen.
This setting should remain set to off for the LT3140 version.
Lid Switch
The Genesis LT3140 has connections for a lid switch. When a lid is connected and the lid switch
setting is set to on, the controller shut power off to the elements, sound an alarm, and give a LID OPEN
Содержание Genesis LT3140
Страница 5: ...GENESIS Model LT3140 Technical Manual...