BARTINGTON INSTRUMENTS
Page 6 of 18 OM2443/4
4.2. Back Panel Connections and Controls
Figure 2. PSU1 Back Panel
7. X Signal Conditioned Output.
8. Y Signal Conditioned Output.
9. Z Signal Conditioned Output.
The three BNC connectors carry the conditioned analogue output voltages. The conditioned
outputs are the magnetometer X, Y and Z signals after they have been modified by the low/high
pass filters and, if a balanced output magnetometer is connected, converted to single-ended
signals.
10. Space for unique serial number.
11. Magnetometer socket for the connection of the magnetometer cable.
Note:
Ensure correct orientation of the connector (indicated by the cut-out on the
connector body aligning with the notch in the socket).
7
8
11
10
9
