CAN Display lococube
DMA-15
Art. No. 0044-0015
MANUAL
Page/of:
Document:
Date:
Revison:
6/23
9021-0028-D
11.12.2023
D
© 2023 BARTH Elektronik GmbH | Im Depot 1-3 | D-49838 Lengerich | www.barth-elektronik.de | [email protected]
® BARTH and lococube are registered trademarks of BARTH Elektronik GmbH. All rights reserved to make changes without prior notice.
Click the little arrow pointing down to open the context .
Now we set the baud rate to 250kBit.
Next we need to download the program onto the
STG-800
.
Now you will see a status window pop up that has various
kinds of information on it, including what type of
BARTH
®
mini-PLC
you‘re using, version, date, etc.
If the status bar at the bottom finished and the the status
says „Run“ at the bottom, hit „OK“.
If you run the program for the first time or made any chan-
ges to it and have not saved it yet, miCon-L will ask you if
you want to save the program before running. Click on „Ja“
if you want to save it or „Nein“ if you don‘t.
The program will automatically be set online now, indicated
by the little yellow light bulb icon at the top, among the now
greyed out icons.
If you want to stop the program and take it offline just click
on that light bulb.
If you have not made any changes to the program and just
want to run it again, you can click on the light bulb to put it
online again.
You only have to use the download button again if you
made any changes to the program.
