CAN Display lococube
DMA-15
Art. No. 0044-0015
MANUAL
Page/of:
Document:
Date:
Revison:
5/23
9021-0028-D
11.12.2023
D
© 2023 BARTH Elektronik GmbH | Im Depot 1-3 | D-49838 Lengerich | www.barth-elektronik.de | [email protected]
® BARTH and lococube are registered trademarks of BARTH Elektronik GmbH. All rights reserved to make changes without prior notice.
For the
DMA-15
to properly function you will have to set
the correct baud rate. It‘s shown on the
DMA-15
display by
default when you power it and it receives no CAN
messages yet.
In our case we need to set it to a default rate of 250kBit.
Navigate to the
macro block
on the left.
Here you can set the baud rate of the
STG-800
.
Right click on it and choose „Parameter-Dialog...“.
Choose the correct COM-Port again and click „OK“.
Before you can edit the program you will need to close the
currently active window first. Press the ‚X‘ in the upper right
hand corner to close it.
