background image

CAN Display lococube
DMA-15
Art. No. 0044-0015

MANUAL

Page/of:
Document:
Date:
Revison:

1/23
9021-0028-D
11.12.2023
D

TABLE OF CONTENT

SAFETY INSTRUCTION .....................................................2

DESTINATED USE ..............................................................2

DISCLAIMER ......................................................................2

1

Product description ..............................................2

1.1  

Features ..................................................................2

1.2 

Applications .............................................................2

1.3 

General descriptions ...............................................2

1.4 

Connection and operation .......................................3

1.5 

Delivery content ......................................................3

Installation ..............................................................3

2.1 

Mounting .................................................................3

2.2 

Wiring ......................................................................3

2.2.1

Overview .................................................................3

2.2.2  Connecting the power suppy ..................................3

2.2.3  Connecting the CAN interface ................................3

Requirements for operation .................................4

Operation with miCon-L .......................................4

4.1 

Connecting the mini-PLC ........................................4

4.2 

Using miCon-L ........................................................4

Programming Templates ......................................7

5.1 

Template 1 - 1V .......................................................7

5.2 

Template 2 - 2 Value .............................................10

5.3 

Template 3 - 4NUMBER ........................................13

5.4 

Template 4 - Colored Screen ................................15

5.5 

Template 5 - Keyboard .........................................17

 

CAN commands ...................................................19

6.1 

Template 1 - 1V .....................................................19

6.2 

Template 2 - 2 Value .............................................19

6.3 

Template 3 - 4NUMBER ........................................20

6.4 

Template 4 - Colored Screen ................................20

6.5 

Template 5 - Keyboard .........................................21

DMA Customization ............................................21

Appenix ................................................................22

 

8.1 

Specifications ........................................................22

8.1.1  General ..................................................................22

8.1.2  Power supply ........................................................22

8.1.3  Display ...................................................................22

8.1.4  Interfaces ...............................................................22

8.1.5  Security features ...................................................22

8.1.6  Program and data memory ...................................22

8.1.7  Timebase (oscillator) .............................................22

8.1.8  Electrical connnection ...........................................22

8.1.9  Electromagnetic compatability (EMC) ...................22

8.1.10  Environmental coniditions .....................................22

8.1.11  Weight and dimensions .........................................23

8.1.12  Ordering information .............................................23

8.2 

Documents, video and software ...........................23

8.3 

Disposal .................................................................23

8.4 

Conformity declaration ..........................................23

© 2023 BARTH Elektronik GmbH  |  Im Depot 1-3  |  D-49838 Lengerich  |  www.barth-elektronik.de  |  [email protected]
® BARTH and lococube are registered trademarks of BARTH Elektronik GmbH. All rights reserved to make changes without prior notice.

Can Display DMA-15 lococube
Art. No. 0044-0015

MANUAL

Содержание DMA-15
























Отзывы: