Bartels Mikrotechnik mpSmart-Flowstop, Руководство оператора

Страница: 6 / 8

6
Rev. 1.1 (02.2021)
Getting started with mpSmart-Flowstop
The mpSmart-Flowstop includes 2 main components:
A mp6 micropump and a valve SMV of the company Takasago.
For the fluid channel, connect them as shown in the following figure. Use tubes with an inner diameter of 1.3 mm
for mp6 micropump inputs and outputs and for the valve. The valve requires one tube on each side. When the valve
is open and allows air or water to pass through, the LED lights up. In the figure the green lines represent the fluid
channel. The arrows mark the flow direction.
For the wiring, use the included cable to connect the mp6 micropump and valve to the Driver PCB and the USB cable
to connect the Arduino on the Driver PCB with your PC.
Software
For the use of the mpSmart-Flowstop, the necessary application needs to be downloaded from the download section
on our website:
www.bartels-mikrotechnik.de
Executing the mpSmart-Flowstop App opens the following window.