5
Rev. 1.2 (04.2020)
The mp6-XOEM controller
The mp6-XOEM is a small, easy to use driving circuit developed for the micropumps of the mp6-series especially
the mp6-liq as it delivers a 200Hz signal at full amplitude as a default signal. It generates amplitudes up to
250 Vpp from a 3-5 V DC supply.
Its low power consumption makes it ideal for battery powered handheld devices or even solar powered devices.
The module can be integrated into a PCB design as an 18 pin DIL package.
The build-in interface allows the user to adapt frequency, amplitude and signal-shape to its application by the use
of a few additional components or a microcontroller.
In order to locate Pin 1, please refer to the following figure. The pin is marked with a colored spot or triangular
marking on the corner of the PCB.
Technical specifications mp6-XOEM
mp6-XOEM controller
Order code: mp6-XOEM
The OEM-controller drives the micropump at adjustable performance in a package similar to an integrated circuit.
It enables integration into system electronics or on a PCB.
Dimensions
10.4 x 20.6 x 4.2 mm
0.41 x 0.80 x 0.165 in.
Adjustable parameters
amplitude, frequency, wave form
Amplitude range
10 – 250 Vpp
Frequency range
50 - 800 Hz
Signal form
sine, rectangular, trapezoid
Power supply
2.5 – 5.0 V DC
(5.5V absolute maximum rating)
(5 V recommended for optimum performance)
Pin arrangement
DIL 18; horizontal 2.54 mm, vertical 7.62 mm
PIN 1
