5
Rev. 1.0 (04.2020)
Safety notice.
The mp6-XEVA generates voltages of up to 250 Vpp.
All parts of the mp6-XEVA evaluation board can carry voltages
in this range. Therefore, the board should only be used by qualified personnel. Although the output power of the
module is very low,
proper insulation according to the application conditions needs to be considered by the
customer.
This especially applies to the lower side of the PCB. Contact with water or other liquids needs to be
prevented. The pump must not be changed while the board is powered.
DANGER
The EVALUATION BOARD can carry high voltage!
Be careful, WHILE CONNECTING AND HANDLING THE BOARD!
Electrical specifications mp6-XEVA evaluation board.
As the evaluation board is based on the mp6-XOEM module, all electrical characteristics and specifications of this
product must be considered.
Please have a look at the corresponding manual for more details.
Functional elements.
1Elements are listed with their names according to the printed description on the PCB.
Connectors:
CON 1
–
Screw terminal for external power supply, external clock, amplitude signal, I²C-interface
CON 2
–
Solder terminal for extension cable to connect one micropump of the mp6-series
CON 3
–
Molex connector to connect one micropump of the mp6-series
Mini USB connector for voltage supply via USB power supply, powerbank or computer
