Bartell B436 страница 18 Скачать руководство пользователя | Manualshive

Страница: 18 / 46

background image

375 ANNAGEM BLVD., MISSISSAUGA, ONTARIO, CANADA, L5T 3A7, 905-364-4200 FAX 905-364-4201

200 COMMERCE DRIVE, FREEHOLD, NEW JERSEY, USA, 07728, 732-566-6400 FAX 732-566-5444

CREATED: 07/04

REVISED: 08/14

WALK BEHIND POWER TROWEL INSTRUCTION MANUAL

1. Plug the trowel into the electrical supply. If the line power is on, the green power indicator

lamp on the top of the trowel will glow.

2. Turn the master starter switch clockwise to the ON (vertical) position. If it will not stay in the

ON position, then turn it fully counterclockwise to the OFF position and try again. The internal

breaker of the starter box will not let the master switch be turned on until it has been reset by

turning it off.

3. With the master switch ON, stand at the operator position behind the handle. The motor will

not start until the safety handle is fully depressed, and it will immediately stop if the safety

handle is released. Squeeze the safety handle with your right hand until it is fully depressed,

and hold this for the duration of operation.

4. Brace your hip against the shield pad on the handle for better control. Bartell Electric Power

Trowels operate at a constant speed which is achieved immediately after startup, so there will

be some kick. With your left hand, press the green start button. The trowel will immediately

begin to turn.

NOTE:

If the trowel appears to hesitate or the motor strains for more than 3 seconds, release the

safety handle and inspect the blades for any obstructions or bonding to the concrete. Clear the

obstacle and try again.

5. To stop the trowel, simply release the safety handle or press the red stop button. Do not

release the handles until the blades have stopped rotating. If leaving the trowel for any

extended period, turn the master switch to the OFF position.

15

375 ANNAGEM BLVD., MISSISSAUGA, ONTARIO, CANADA L5T 3A7, 905-364-4200 FAX 905-364-4201

CREATED: 07/04

REVISED: 05/10

17

«
...
16
17
18
19
20
...
»

Содержание B436















































Отзывы:

Нет отзывов

Похожие инструкции для B436

Бренд: allen Страницы: 108

Бренд: allen Страницы: 114

Бренд: Bartell Global Страницы: 28

Бренд: MBW Страницы: 55

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды