Bartell Global Innovatech Terminator T-2200PRO, Полное руководство

Страница: 15 / 50

P a g e | 14
OIPB-I03026-T2200PRO_v3.1
2. Malfunction Indicator Light
The Malfunction Indicator Light (MIL) will illuminate when the engine is running out of
specification. The illumination of the MIL will typically be accompanied by an error code,
which can be accessed and displayed on the information display.
3. Hydraulic Filter Clog Indicator
The hydraulic oil filter is equipped with a clog indicator which will illuminate when the
hydraulic oil filter is clogged. The indicator may briefly illuminate in cases of extreme
cold and will turn off when the hydraulic oil was warmed to a normal operating
temperature.
15. Acceptable Carbon Monoxide Levels
IMPORTANT! OSHA Requirement
– What Service Personnel Should Know!
The CO level shall not exceed 35 parts per million (PPM) measured over an 8-hour period
in the work environment. 1,000,000 PPM is equivalent to 100% of all exhaust gases. For
each one one-hundredth of one percent, you will have 100 PPM.
With adequate ventilation and following the enclosed adjustment instructions, you should
be able to keep the CO level below the OSHA requirement. Innovatech strongly
recommends the use of a CO analyzer.
16. Blade Assembly
Blades are available in different configurations and thickness. An assortment of blades is
included in the purchase price of the Terminator
®
. Extra blades are available upon request
from Innovatech Products & Equipment Co., Inc.
Installing a Blade:
1. Raise the jaw assembly to maximum up position.
2. Unwrap the pre-sharpened blades and select the blade thickness and length you
need for the job.
3. Loosen the 7 holding bolts.
4. Insert the sharpened blade.
5. Tighten bolts firmly, starting from the center and working out. Bolts should be snug
but not over-tightened.
17. Taking Up Floor Coverings
1. Insert the blade. (See Blade Assembly)
2. Lower the jaw assembly to the floor. Lift the caster wheel off the floor 1/4 inch. Use
previous procedures to drive forward.
3. As the Terminator
®
is removing flooring material, it is recommended to have another
person at the side of the machine removing accumulating debris.
Discount-Equipment.com