RAMMER
OPERATOR’S MANUAL
24
OI-B19026
TROUBLESHOOTING
A.
Difficult to start
Fuel is available but plug does
not ignite.
Power available at high tension
code
Improper spark gap
Ignition plug being bridged
Carbon deposit at ignition plug
Short circuit due to defective
insulation
Power NOT available at high
tension code
Ignition coil defective
Short circuit at stop button
Compression normal
Air filter clogged
Water or dust in fuel
Inadequate fuel quality
Inadequate mixed fuel quality
Muffler clogged with carbon deposit
Compression insufficient
Cylinder worn
Piston ring stuck
Roughened valve seat
Insufficient tightening of ignition
plug
Fuel not available at carburetor
Fuel filter clogged
Air in the fuel pipe
No fuel in tank
Fuel valve not properly opened
Tank cap air breather clogged
Recoil starter does not operate
smoothly
Dust in rotating part
Spiral spring failure
B.
Operation not satisfactory
Not enough power available
Compression insufficient
Cylinder worn
Piston ring stuck
Roughened valve seat
Insufficient tightening of ignition
plug
Compression normal, no misfire
Air in fuel pipe
Air filter clogged
Carbon deposit in cylinder
Improper fuel level in carburetor
float chamber
Compression normal, misfire
Inadequate fuel
Defective ignition coil
Short circuits at ignition coil
Ignition plug needs cleaning
Содержание BR68
Страница 28: ......