RAMMER
OPERATOR’S MANUAL
19
OI-B19026
10.
To stop tamping action, quickly move the throttle lever from OPERATING to IDLE
position. Do not move the lever slowly as this can result in irregular motion and damage
to the unit.
CAUTION
Wear gloves while operating machine to reduce fatigue caused by vibration.
STOPPING
1.
Let the engine run for three minutes at idle speed to allow proper cooling before shutting
down. This will allow proper cylinder lubrication.
2.
After the engine is cooled down, close the fuel valve.
3.
Pull the starter handle slowly and return the handle to its original position when
resistance is felt. This action is necessary to prevent outside moist air from entering the
carburetor chamber.
MAINTENANCE AND SERVICE
CAUTION
•
Flammable liquid
is used for this machine. No naked flames are allowed
within a 6 m (20 ft) radius of the machine. Fire or explosion could result from
flame, sparks, or if fuel is spilled on a hot engine.
•
Moving parts
are hazardous. Shut down the engine before performing any
service or maintenance to the machine. Contact with moving parts can
cause serious injury.
•
High temperature
of machine after operation. Allow machine and engine to
cool before performing service or maintenance. Contact with hot component
can cause serious burns.
•
Risk of serious personal injury from accidental starting.
Remove the
sparkplug before performing any inspection, maintenance, or cleaning
procedures. Damaged equipment can fail, causing serious personal injury.
•
Do not use damaged equipment.
If abnormal noise or vibration occurs, have
the problem corrected before further use.
It is essential to do regular machine maintenance for safe usage and prolonged lifespan. Below
is the breakdown of the service and maintenance procedure.
Содержание BR68
Страница 28: ......