Bartec Tech200BT, Руководство пользователя

Страница: 32 / 44

Tech200BT User Guide rev3.0 April 2014
APPENDIX C: FAQ’S & TROUBLESHOOTING GUIDE
1.
The tool is set up correctly for make model and year but the tool
does not work on the sensor?
Answer: hold the tool in the proper position, TPM is actually faulty, or
vehicle has incorrect TPM installed.
2. I have a faulty sensor and the dealership gave me a new one but it
will not program to the car. Answer: The dealership probably gave the
wrong sensor. Many vehicles of the same model might have 2 or 3
possible sensor variations to accommodate high and low pressure
ranges, frequency, etc.
3. I just rotated the vehicle’s wheels. Do I need to re-learn the sensors
to the vehicle? Answer: Yes if the car is position dependent.
4. The tool won’t turn on. Answer: Make sure battery is fully charged.
Charge tool for 2+ Hours and retry power on.
5.
Everything has been selected on the tool correctly but a P with the
down arrow shows up and when I press test the TPM does not
initiate. Answer: The P with down arrow means this is a DELTA P
sensor. This means the tire pressure has to be let out before the
sensor will transmit.
Other Resources:
www.tpmshub.com
www.whytpms.com
32