Installation
POLARIS PROFESSIONAL
- for Zone 2 / 22
POLARIS Panel PC Professional 15" up to 24"
34/66
Technical data subject to change without notice..
08/2019
5.6.6
BARTEC PROFIBUS-DP Interface (optional)
The interface PROFIBUS-DP (BARTEC) may only be applied in combination with
visualization software BMS-Graf-pro 7.
Configuration PROFIBUS-DP (BARTEC)
Terminal Interface
Signal
Remarks
X17
not connected
X18
not connected
X19
Interface COM 1 Termination B2 Bridge for terminating network(B1-B2)
X20
Interface COM 1 Termination A2 Bridge for terminating network (A1-A2)
X21
Interface COM 1 Termination B1 Bridge for terminating network (B1-B2)
X22
Interface COM 1 Termination A1 Bridge for terminating network (A1-A2)
X23
Interface COM 1 Out B
Signal B Output
X24
Interface COM 1 Out A
Signal A Output
X25
Interface COM 1 In B
Signal B Input
X26
Interface COM 1 In A
Signal A Input
Connection of a controller via a PROFIBUS-DP interface of the POLARIS.
Maximum line length: see PNO specification.
Pins 26-24-22, 25-23-21 are already connected inside.
See the interface description from the controller manufacturer for the relevant pin
assignment of the controller.
Содержание POLARIS B7-72V1 Series
Страница 6: ...blank...