Bartec P-600 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 60

Bartec P-600 Скачать руководство пользователя страница 29

P-600 SIC Analyzer Manual

Chapter IV: Programming

23

ANALYZER STATUS

This field indicates the current status of the Analyzer. Touch the up/down arrow keys to change the status.
Window message will appear to confirm or decline your choice.

ALARM HISTORY

This menu item provides access to the Alarm History submenu, which lists conditions which have activated
one or more of the Analyzer’s alarm functions. It is described in further detail in Chapter V: Normal
Operation. Touch the Enter key to access this submenu.

VALIDATION HISTORY

This menu item provides access to the Validation History, which lists validation measurements that have
been performed. Validation is described in further detail in Chapter V: Normal Operation. Touch the Enter
key to access this submenu.

SERVICE

This menu item provides access to the Service submenu; entering it automatically takes the Analyzer
offline, if it was running. The Service menu allows you to activate various measurement system
components, test the analog output, and view selected sensor readings. It is described in detail in Chapter
VI: Maintenance & Service. Touch the Enter key to access this submenu. A screen will appear asking if you
are sure to enter the Service menu; this is intended to prevent you from inadvertently taking the Analyzer
offline.

«
...
27
28
29
30
31
...
»

Содержание P-600





























































Отзывы:

Нет отзывов