Bartec MC 92NOex-IS, Быстрый старт

Страница: 34 / 44

Operation
MC 92N0
ex
-IS - Mobile Computer
Type 17-A1A*-****/********
28/36
Subject to technical changes.
January 2022
Change keypad
The Mobile Computer MC 92N0
ex
–IS has interchangeable modular keypads.
DANGER
Non-certified accessories endanger explosion protection.
There is a risk of fatal injury in an explosive atmosphere!

It must be ensured that only original keypads from BARTEC with blue overlay are
used in safety-oriented operation.

The use of imitation keypads from other manufacturers will render the type of
ignition protection ineffective and there will then be a risk of fire or explosion.
Only permitted outside the potentially explosive atmosphere:

The keypad may only be changed outside the hazardous area!

Follow proper ESD precautions to avoid damaging the Mobile Computer. Proper
ESD precautions include, but are not limited to, working on an ESD mat and
ensuring that the operator is property grounded.
ATTENTION
Incorrect handling may cause damage to property!

Power off the MC 92N0
ex
-IS before start of change parts.

Put the MC 92N0
ex
-IS into suspend mode before you remove the battery. Failure to
properly remove the battery may cause the MC 92N0
ex
-IS to cold boot and potential
loss of data.
Work steps:
1. Turn off the Mobile Computer MC 92N0
ex
-IS.
2. Remove the battery (see chapter: Insert/change battery).
3. Take out the screws at the top edge of the keypad.
4. Pull the keypad downwards in the direction of the arrow and then forwards to take it
out of the MC 92N0
ex
-IS.
5. Check that the contacts and seals are clean and in good condition.