About this manual
5
MAK 3003 Measuring system TIGER / LYNX Operating Instructions, Software version 2.35, BA 190130 (11.07.2022)
1
About this manual
The operating instructions are part of the product and must be kept in the
immediate vicinity of the device. The personnel for assembly, operation and
maintenance must have access to it at all times.
The operating instructions contain important notes, safety instructions and test
certificates that are necessary for the correct functioning of the device during
operation. The operating instructions are intended for all persons involved in
the assembly, installation, commissioning and maintenance of the product.
The illustrations in this manual are intended to illustrate the information and
descriptions. They cannot always be transferred unchanged and may differ
slightly from the actual design of the device.
BARTEC GmbH reserves the right to make technical changes at any time.
BARTEC GmbH is under no circumstances responsible or liable for any indi-
rect or consequential damages resulting from the use, operation or application
of this user manual.
Please read the operating instructions carefully before using the
product.
Please note that the instructions must be kept by the user for the entire
life of the product.
Signs and symbols
The following characters and symbols are used in this manual to highlight
passages that need special attention.
Notes
This arrow indicates special features to be observed during operation.
Warning
This symbol draws your attention to passages that, if not followed or followed
inaccurately, may result in damage to or destruction of parts of the system or
loss of data.
Danger!
This symbol marks passages that, if not followed, endanger the health or life
of humans.
Special notes that appear within the text are marked with a frame.
