Bartec ALCAR TECH600, Руководство пользователя

Страница: 23 / 31

TECH600 User Guide 2020
23 | P a g e
S
ETTINGS
Connections Connect to a Bluetooth OBDII Module, TPMS Desktop, and WiFi.
General Check and update time and date on the tool, and change the
language displayed
Sound and Vibration Enable or disable tool sounds or vibrations
TPMS Change the units displayed when reading a TPMS sensor, for
Pressure, Temperature, and the TPMS ID
Power Change the length of time before the tool automatically turns off
Tool Info Display the tool info, including software version, serial number
etc.
Update Tool Update the tool to the latest software (requires the tool to be
registered; see page 14).
Unlock Coverage Allows the user to enter a code to unlock coverage on their tool.
Restore Default Restore the tool settings to factory settings.
C
ONNECTING TO A
W
I
F
I
N
ETWORK
After selecting Connections in the Settings menu, it is possible to choose between
Bluetooth (OBDII Module and TPMS Desktop), and WiFi.
To connect to a WiFi network, highlight
‘WiFi: Join Network ’ and press Enter. Select
the correct available network displayed by highlighting it and pressing Enter. Use Up
Arrow key to start with upper case, Down Arrow key for numbers and lower case to
enter the passphrase. ESC to go back a position and Enter to enter the next character.
TEST to connect. S
pecial characters like β, ä, ö, etc cannot be selected.
When connected, it is possible to check for updates.
To go ahead, press enter. To check later, press ESC.
Current network displays information about the network the tool is connected to.