Bartec 6727-61, Инструкция по эксплуатации, Страница: 14 / 27

Installation
3-2
Desk reader for barcode bottles type 6727-61 BA 021212
3.2.2 Connection via keyboard interface
If it is connected via the keyboard interface, the barcode reader is inserted between the PC and the
keyboard. XT/AT plugs or PS/2 plugs are available.
3.3 Replace connecting cable
To change the interface type of the barcode reader, the connecting cable has to be replaced (for con-
necting cable types see ordering designations).
Cautiously insert a thin stiff wire (e.g. a paper clip that has been straightened out) into the opening at
the underside of the housing and push back the lock of the interface cable. At the same time draw the
cable out of the outlet box.
Plug in the new cable until it snaps into place.
After the interface cable has been replaced, the device has to be reinitialized (see 4.2 and 4.3).