TAP100/200 User Guide R.5.3 2019
11
|
P a g e
P
OWER
ON/OFF
S
EQUENCE
The TAP100/200 is powered up using the Back/On key.
To power the tool on, press the Back/On key. The display will light, indicating the tool name. The tool will
then display the Main menu.
Power down the tool by selecting “Off” from the Main menu and pressing the Enter key. “Goodbye” is
displayed, and the tool will power off.
Auto Off can be configured under “Setup” from the Main menu.
IMPORTANT NOTE: The tool does not store data after being powered off. Be sure to send any existing
measurements to TPMS Desktop before the tool turns off for any reason.
H
OME
M
ENU
The home screen, which provides access to the main functional items of the tool, is shown after power up.
From the Main menu, highlighting a selection and pressing the Enter key provides access to the following
features:
S
TART
M
EASUREMENTS
Pressing the Enter Key, the vehicle audit screen appears, where tread depth
and air pressure is measured.
