4
BAR100-20BD | OWNER’S GUIDE
3. Before unpackaging the machine, please dismantle the cargo fixed parts and ropes
fixing the machine on the warehouse. Carefully unload the machine from the ware
-
house with the aid of the others.
Note:
If no handling apron is used, please do not push the machine directly so as to
avoid machine damage.
Note:
To avoid machine damage, please install the battery after unloading the ma-
chine from the warehouse.
Battery Installation
Warning: fire or explosion hazard. The battery releases hydrogen. Please be away
from spark or open fire. The battery cover must be kept open when charging.
For safety:
Please wear protective gloves and eye protectors when treating the bat-
tery and battery wiring when repairing the machine. Avoid contacting the battery liquid
acid.
1. Stop and place the machine on the level ground and take out the key.
2. Lift up the waste water tank to expose the touchable battery compartment.
3. Carefully install the battery in the battery cabin and connect the battery cable ac-
cording to the following figure:
Note:
Please do not throw the battery into the battery cabin so as to avoid the damage
to the battery and the machine.
4. Before connecting the battery, please firstly ensure whether the electrodes and elec
-
tric terminals are clean. Use electrode cleaning fluid and wire brush as required.
Explanation: Paint a thin layer of metal-free lubricating oil or protective spray on the
connected wiring to avoid battery corrosion.
5. After the battery is installed, please check the scale of the battery coulombmeter.
Charge the battery as required.
Machine Cleaning Method
Cleaning method:
Manually control the water valve to adjust the volume of the
cleaning liquid (water and detergent) flowing to the ground. The brush cleans the floor
with the solution mixing detergent and water. While the machine advances, absorb the
waste water on the floor with squeegee into the waste water tank.
Information on Brush and Scouring Pad
To ensure the optimum efficiency, please use the correct type of brush for cleaning.
The brush and scouring pad suggested for use are as follows:
