11
WWW.BARTCLEAN.COM
PROBLEM REASON
SOLUTION
The machine can not be operated
The battery has no power
Charge the battery
The battery fails
Replace the battery
The battery wiring is loose
Fasten the battery wiring
The main fuse blows out
Replace the fuse
The brush motor does not work
The brush head rises up from the ground
Lower down the brush head
The battery coulombmeter is locked
Charge the battery
and not started
The breaker of the brush motor
Reset the button of the breaker
circuit triggers blackout
of the brush circuit
The brush (upper/lower) switch fails
Contact with the service centre
The carbon brush of the motor wears
Contact with the service centre
The vacuum motor does not work
The squeegee rises up from the ground
Lower down the squeegee
The fuse of the vacuum motor blows out
Replace the fuse
The vacuum motor or wiring fails
Contact with the service centre
The carbon brush of the motor is worn
Contact with the service centre
A little or no water flows out
The filter or solution pipe of the clean
Clean the filter of the clean
water tank is blocked
tank
The speed of the flow control knob
Adjust the water control knob
is set too low
The screw of the control knob is
Lubricate the knob and then
loosened
fasten the screw
The waste water recovery rate
The waste water tank is full
Drain the waste water tank
is low
The water-absorbing adhesive tape is
Replace the water-absorbing
worn
adhesive tape
The water suction pipe is blocked
Remove the blocked scraps
The sealing strip of the waste water
Replace the sealing stripe
tank is damaged
The vacuum motor fails
Contact with the service centre
The running time shortens
The battery has flaws
Replace the battery
The battery charging fails
Repair or replace the charger
running out.
2. Drain and flush thoroughly the bottom of teh water tank.
3. Store the machine in a dry palce and the brush head shall be kept in the rising
position.
4. Open the cover of the waste water tank. Note: Don not let the machine subject to
the rain and store it indoor.
5. If the machine is stored in a cold environment, please indeed drain all liquid in the
machine.
Troubleshooting
