６０ｍｍ
７０ｍｍ
Installing Latch
The latch has two backsets available: 2 3/8” [60mm] backset or
2 3/4” [70 mm] backset
Secure the latch to the door using two wood screws supplied.
Latch unit face plate must be flush with door.
Installing spindle, and front lock body
Close view
Spindle
Very important note:
As the photo shows there is an arrow
pointing up to the small triangle. This is
the only position where the clutch can be
activated during normal operation.
Cable connector
Front lock body gasket
Note:
The wire goes under the latch
2 3/8” [60mm] backset or 2 3/4” [70 mm] backset
3
4
