Barska BE11922 Скачать руководство пользователя страница 2

TREASURE HUNTER’S CODE OF ETHICS

A few basic rules you should follow while using your detector

 

- Always get permission before searching any site

 

- Respect the rights and property of others

 

- Observe all national, state and local laws when treasure hunting

 

- Never destroy historical or archaeological treasures. If you are not sure 

  

  about an object you have found, contact a museum or historical society 

 

   in your area.

 

- Leave the land and vegetation as is, and fill in any holes you dig.

 

- Use the detector only in safe areas

 

- Dispose of any junk you may find, only in approved areas. Do not 

 

   leave it for the next treasure hunter find.

PARTS OF THE DETECTOR

PREPARATION

Assembling the Detector
Assembling your detector is easy and requires no special tools, just follow these 
steps
 

1. Unscrew the knob on the search coil and remove the knob connector. 

 

    Insert the stem and align the holes on the search coil bracket and the 

 

   stem. Push the connector through the holes and tighten the knob.

 

2. Press the spring clips on the upper end of the lower stem and slid  

 

    the lower stem into the upper stem. Adjust the stem to a length that  

 

    can let you maintain a comfortable upright posture, with your  

 

    arm relaxed at your side and the search coil level to the ground 1/2 

 

    inches above.

 

3. Wind the coil cable around the stem, leave enough slack in the cable. 

 

    Insert the coil plug into the matching connector on the control 

 

    housing. Be sure the holes and pins line up correctly.

Treasure Hunter’s Code of Ethics

3

Parts of the Detector

3

Preparation

3

Assembling the Detector

3

Batteries

4

Using the Headphones

4

Listening Safely

4

Functions and Indications

5

A Quick Look at the Detector

5

Displays

5

Gold Range

6

Silver Range

6

Tones

6

Touch Pads and Controls

7

Operation

7

Turning on the Detector

7

Setting the Operation Mode

7

Ground Balance

9

Testing and Using the Detector

10

Indoor Testing and Use

10

Outdoor Testing and Use

10

Search Coil Sweeping Hints

11

Application Hints

12

Pinpointing the Target

12

Factors that Affect the Detecting

12

Care and Maintenance

13

Warranty

14

2

www.barska.com

3

www.barska.com

Содержание BE11922









Отзывы: