Barry-Wehmiller Thiele Technologies Streamfeeder Reliant 1500, Руководство пользователя

Страница: 33 / 72

27
R
elaint
1500 M
anual
4
How to Operate
Sequence of
Operation
Successful power-up and operation is assured if you apply the follow -
ing sequence of steps.
STEP 1:
Loading Material
in the Hopper
Preshingling prevents multiple sheets from
jamming under the gate assembly at start-up.
NO TE
• Start by preshingling by hand a small stack of material (Figure 29)
so that it conforms to the curvature of the gate assembly. Push in
gently to make sure lead edges touch the gate bracket assembly and
front edges of the hopper guides (Figure 30).
• At the back wedge, notice how it helps lift the trailing edges of the
material off the table top and feed belts. Also notice how the lifting
helps to push the preshingled edges against the curvature of the gate
assembly (Figure 31).
Figure 30. Leading Edges Against Gate Bracket
Assembly and Side Guides
Figure 31. Trailing Edges Lifted by Back Wedge
This end
against
gate assembly
Figure 29. Preshingling of First Stack
NO TE
If you wish, loading of material can be accom-
plished from the front side of the inserter.
Lead edges
of material
Resting
against
surface of
gate bracket
assembly
Trailing
edges lifted