Barrus Shire 15 15 WB Скачать руководство пользователя | Manualshive

Страница: 86 / 97

background image

RDG603A13

– Issue 19

Page 86 of 97

12.5. Results of PBT and vPvB assessment

Results of PBT and vPvB

This product does not contain any substances classified as PBT or vPvB.

assessment

12.6. Other adverse effects

Other adverse effects

None known.

SECTION 13: Disposal considerations

13.1. Waste treatment methods

General information

This material and its container must be disposed of as hazardous waste. Dispose of waste via
a licensed waste disposal contractor.

Disposal methods

Waste, residues, empty containers, discarded work clothes and contaminated cleaning
materials should be collected in designated containers, labelled with their contents. Dispose of
waste via a licensed waste disposal contractor.

Waste class

European waste catalogue (EWC) number = 13 02 08* (other engine, gear and lubricating oil)

SECTION 14: Transport information

General

The product is not covered by international regulations on the transport of dangerous goods
(IMDG, IATA, ADR/RID).

14.1. UN number

Not applicable.

14.2. UN proper shipping name

Not applicable.

14.3. Transport hazard class(es)

No transport warning sign required.

14.4. Packing group

Not applicable.

14.5. Environmental hazards

Environmentally hazardous substance/marine pollutant

14.6. Special precautions for user

Not applicable.

14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code

Transport in bulk according to

Not applicable.

Annex II of MARPOL 73/78
and the IBC Code

SECTION 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture

National regulations

Health and Safety at Work etc. Act 1974 (as amended).
The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (SI 2009
No. 716).
Control of Substances Hazardous to Health Regulations 2002 (as amended).
The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment
Regulations 2009 (SI 2009 No. 1348) (as amended) ["CDG 2009"].

EU legislation

Dangerous Preparations Directive 1999/45/EC.
Dangerous Substances Directive 67/548/EEC.
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) (as amended).
Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16
December 2008 on classification, labelling and packaging of substances and mixtures (as
amended).

Guidance

Workplace Exposure Limits EH40.
Safety Data Sheets for Substances and Preparations

.

«
...
84
85
86
87
88
...
»

Содержание Shire 15 15 WB


































































































Отзывы:

Нет отзывов

Похожие инструкции для Shire 15 15 WB

Бренд: Saito Страницы: 2

Бренд: Saito Страницы: 8

Бренд: King Canada Страницы: 8

290000 Vanguardv Gasoline

Бренд: Briggs & Stratton Страницы: 13

Бренд: KTM Страницы: 92

Бренд: Mercedes-Benz Страницы: 324

Бренд: ROJ Страницы: 60

Бренд: TJERNLUND Страницы: 3

Бренд: Honda Страницы: 40

Бренд: Honda Страницы: 42

Бренд: O'Donnell Страницы: 16

Бренд: Stober Страницы: 6

Бренд: O.S. engine Страницы: 9

Бренд: O.S. Speed Страницы: 20

Бренд: O.S. engine Страницы: 23

Бренд: B&R Страницы: 98

Бренд: Tomahawk Страницы: 20

Бренд: DLE Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды