RDG603A13
– Issue 19
Page 75 of 97
2. Declaration of Incorporation of Partly Completed Machinery
(Original declaration according to Directive 2006/42/EC, Annex II, part 1B)
1.
The manufacturer:
E. P. Barrus Limited
Glen Way
Launton Road
Bicester
OX26 4UR
2.
Authorised Compiler of
Relevant Technical
Documentation:
Mr. Graeme Aldridge
Glen Way
Launton Road
Bicester
OX26 4UR
3.
Partly Completed Machinery: Designation:
Marine engines for propulsion of, and incorporation
into, watercraft.
Description:
Serial No.:
and their
derivatives.
Shire 15 15CB
XX-2400-X
Base Engine:
2M78
4.
The essential health and safety requirements of the Directive 2006/42/EC, Annex I, relating to the design
and construction of the engines have been applied and fulfilled as shown in Annex A of this Declaration.
The relevant technical documentation is compiled in accordance with part B of Annex VII of the Directive.
The engines also comply with measures against the emission of gaseous and particulate pollutants from
internal combustion engines to be installed in non-road mobile machinery contained in the Directives
97/68/EC, amended by 2002/88/EC and 2004/26/EC.
The engines also comply with Directive 2013/53/EU (Recreational Craft Directive), Article 6, part 4 in that
the engine will continue to meet the exhaust emission requirements of either Directive 97/68/EC or of
Regulation (EC) No 595/2009, as declared above, when installed in accordance with the installation
instructions that accompany the engine.
5.
In case of a reasoned request by the national authority, we will supply the relevant technical
information of the above named engines to the person in charge.
6.
This partly completed machinery must not be put into service until the final machinery into which it has
been incorporated has been declared in conformity with the provisions of this directive, where
appropriate.
7.
This declaration is made on 24 April 2017 in Bicester, Oxfordshire.
Tim Hart
Sales Director
E. P. Barrus Limited
