Solenoids misfiring:
Misfiring solenoids can be caused by low voltage. Voltage issues may be from a card swipe system
attached to the 12V power supply in the table or by the knob (technically called a "Trimpot") in the
photo above. It is recommended that customers use an external power source for card swipe systems.
Check the voltage coming out of the power supply and adjust the trimpot by rotating it clockwise or
counterclockwise as necessary to increase or reduce the output, if solenoid issues are not from the card
swipe system.
For comments, questions, and concerns please contact the Barron
Games Service Department at +1(716) 866-0054 or
[email protected].
