Barrett HF SDR 4000 Series, Руководство пользователя

Страница: 12 / 38

12
DIGITAL VOICE AND SECURE DIGITAL VOICE - SET-UP
Barrett Communications Key Management Soft-
ware Quick Start Guide (2000 & 4000 Series Trans-
ceivers)
Two variants of the software are available, a 56-bit version for use with DES
keys and a 256-bit version for use with AES keys. These variants are the same,
except for the length of the keys that are generated. The 56-bit version is shown
throughout this manual although the instructions contained are applicable to
both variants.
The typical steps to generate keys and load them onto a transceiver are as fol-
lows:
1. Connect the transceiver to a PC.
2. Install the Key Management Software (KMS)
3. Set transceiver to “SDV/DV Programming Mode” (4000 series) or “Scram-
bler Program Mode” (2000 series).
4. Generate the keys (255 secure keys fro 4000 series transceivers and 15
secure keys for 2000 series transceivers)
5. Export the keys to an appropriate location or folder
6. Load the keys onto the transceiver using either the Configuration Load
Software (4000 and 2000 series) or the USB socket on the transceiver front
panel (4000 series only).