Installation Guide
7
B6569
Barrett Technology, LLC / 73 Chapel Street / Newton, MA / 02458 / 617.252.9000
Rev AB.00
Bimanual Instructions
13.
Screw the bimanual cable into the front of both consoles using the parts labeled
“bimanual”. Ensure that the cable has been connected completely.
14.
Plug the HDMI cable coming from the
Primary robot console
into a monitor.
15.
Plug the power cable of both BURTS into AC power sockets.
16.
Adjust the lifting column height to the
desirable position by pressing the buttons
pointing up and down.
17.
Route HDMI and power cable through cable holders on the T-Plate.
18.
Place cord concealers over HDMI and power cable. Leave cabled E-stop free and
always in an easily accessible location away from foot traffic.
19.
Turn on the toggle switch on the back of the console.
20.
Press the power button on the front of the Primary robot console
. The
Secondary console will power cycle automatically.
