This feature allows the Barrett 950 transceiver to be used in remote site configurations using
other 900 series Barrett products such as the 972 remote site controllers and the 974
system integration system
... selects local receive and local transmit, i.e. normal transceiver operation.
... selects remote receive and local transmit, i.e. the transceiver transmits through the local
antenna but the receive signal is input as an audio signal from a remote receiver through the
600 ohm balanced audio input port on pin 11 and 24 of the accessory connector on the rear
of the 950 transceiver.
... selects local receive and remote transmit, i.e the transceiver receives through the local
antenna but the transmitter is disabled and transmit audio is output to modulate a remote
transmitter through the 600 ohm balanced audio output port on pin 12 and 25 of the
accessory connector on the rear of the 950 transceiver.
... selects both of the states above. i.e. the 950 transceiver operates as a console not as a
transmitter and receiver.
Remote / Local configuration
BARRETT 950 HF TRANSCEIVER
PAGE 66
