Caution
:
Be careful not to over tighten the clamps. The clamps should be firm but not deformed.
Re-check the tightness of all mounting hardware when done.
Important
:-
Ensure the door seals at the top of the door do not catch on the clamp when fitted. If
they do, check the clamps are sitting flat against the underside of the surface and tighten until the door
seals clear. See the illustration below.
Note:-
On some vehicles, the hinge bolts of the doors may require loosening and the door and latch
lowering. Contact your Barrett Communications representative if you have any problems.
Barrett Communications Pty Ltd accepts no liability for damage to door seals, as correct fitting will
ensure door seals are protected
.
16 of 31
