Barranca Diamond HP18, Инструкция по эксплуатации и список запасных частей

Страница: 4 / 40

4
SaFETY PRECaUTIONS
read and follow all safety, operating and maintenance instructions. Failure to read and follow
these instructions could result in injury or death to you or others. Failure to read and follow these
instructions could also result in damage and/or reduced equipment life. in order to prevent injury, the
following safety precautions should be followed at all times!
REaD OwNER'S MaNUal bEFORE USE
Before using this equipment, ensure that the person operating this machine has read and
understands all of the instructions in the manual. precaution is the best insurance against accidents.
read and understand all safety precautions, messages, warnings and hazard symbols. You are
responsible for your own safety.
alwaYS USE SaFETY GlaSSES
safety glasses should always be worn when working around power tools. in addition, a face, dust
mask or respirator should be worn if a cutting operation is dusty. everyday eyeglasses only have
impact resistant lenses and may not prevent eye injury - they are nOt safety glasses.
USE PROPER aPPaREl
do not wear loose clothing, gloves, neckties, rings, bracelets or other jewelry that may be caught in
moving parts. non-slip footwear is recommended. wear protective hair covering to contain long hair.
Hand protection (plastic gloves) and a shop bib are recommended during sawing to prevent stains to
clothing. avoid prolonged exposure of skin to the sawing lubricant and wash skin immediately after
contact. do not touch the work material until the motor is off and the machine has come to a complete
stop.
alwaYS USE HEaRING PROTECTION
to reduce the possibility of hearing loss, always use hearing protection when operating power
equipment.
KEEP GUaRDS IN PlaCE
in order to prevent injury, never operate the saw without the guards in place!
REMOvE aDJUSTING KEYS aND wRENCHES
Form a habit of checking to see that keys and adjusting wrenches are removed from the power tool
before
it is turned on.
ElECTRICal SHOCK
never touch electrical wires or motor components while the motor is running. exposed, frayed or worn
electrical wiring and plugs can be sources of electrical shock that could cause severe injury or burns.
DISCONNECT TOOlS
power tools should always be disconnected before servicing or when changing accessories, such as
blades, bits, cutters and the like.
Slab Saw SERIES SaFETY