Barranca Diamond BD7, Руководство пользователя и инструкции по эксплуатации

Страница: 16 / 28

16
It will be necessary to access the blade for inspection or replacement.
1. Remove wing nut and lift table up. (Figure 17)
2. Use a 18mm adjustable wrench and allen wrench to tighten or loosen the jam nut, right hand
thread. (Figure 19)
Diamond Blade Installation and Removal
Figure 18: Blade Arbor Blade,
Outer Flange, and Jam Nut
Figure 17: Lift Table Figure 19: Changing the Blade
BD7 DIAMOND BLADE
NOTICE: Do not over tighten the jam nut! Blade flanges must always be installed with their con-
cave or recessed side facing the blade. (Figure 20)
Figure 20: Convex (recessed)
Side of the Blade Flange
7-inch Trim Saw Accessories
Item Description Part#
Dressing Stick 6" x 1" x 1" 999997
Dressing Stick 8" x 2" x 1" 164025
Rock Vise • 169400
Splash Hood • 169730