Barox LT-PIGE-804GBTME Series, Руководство пользователя

Страница: 10 / 23

6
LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that display
the power status and network status. Each LED indicator has a different color and has its own specific
meaning, see below in Table 2.1.
LED Color Description
P1 Green
On Power input 1 is active
Off Power input 1 is inactive
P2 Green
On Power input 2 is active
Off Power input 2 is inactive
Fault
Green
On System is ready
Off System is booting
Red
On Fault alarm event triggered
Off Normal state
Master Green
On ERPS Owner Mode (Ring Master) is ready
Off ERPS Owner Mode is not active
Ring Green
On Ring Network is active and works well
Flashing Ring works abnormally or misconfigure
Off Ring Network is not active
LINK/ACT
(SFP Port)
Green
On Connected to network
Flashing Networking is active with 1000Mbps
Off Not connected to network
Amber
On Connected to network
Flashing Networking is active with 100Mbps
Off Not connected to network
LAN Port 1-8
(Left LED)
Green On Connected to network, 10/100/1000Mbps
Flashing Networking is active
Off Not connected to network
LAN Port 1-8
(Right LED)
Green
On The port is supplying power to the powered-device
Off No powered-device attached or power supplying fails
Table 2.1: LED Indictors for LT-PIGE-804GBTME Series