barox Kommunikation
9
To connect the transceiver and LC cable, please follow below steps:
Step 1.
Insert the SFP transceiver module into the SFP slot as shown below in Figure 2.9. Notice that
the triangle mark is at the bottom of the SFP slot. Figure 2.10 shows SFP transceiver module
was inserted.
Figure 2.9: Transceiver to the SFP Module
Figure 2.10: Transceiver Inserted
Step 2.
Insert the fiber cable of the LC connector into the transceiver as shown below in Figure 2.11.
Figure 2.11: LC Connector to the Transceiver
