Barox Kommunikation RY-LGSP23-10G, Руководство пользователя, Страница: 238 / 383

barox Kommunikation
Publication date: Sept, 2015
Revision A1
227

Sender :
Specify the sender name of the alarm mail.

Return-Path :
Specify the sender email address of the alarm mail. This address will be the "from" address
on the email message.

Email Address 1-6 :
Email address that would like to receive the alarm message.

Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved values.
Chapter 3.
Monitor
This chapter describes all of the basic network statistics which includes the Ports, Layer
2 network protocol (e.g. NAS, ACL, DHCP, AAA and RMON etc.) and any setting of the
Switch.
3-1 System
After you login, the switch shows you the system information. This page is default and tells you
the basic information of the system, including “Model Name”, “System Description”, “Contact”,
“Location”, “System Up Time”, “Firmware Version”, “Host Mac Address”, “Device Port”. With
this information, you will know the software version used, MAC address, serial number, how
many ports good and so on. This is helpful while malfunctioning.
3-1.1 Information
The switch system information is provided here.
Web interface
To configure System Information in the web interface:
1. Click Monitor, System and Information.
2. Check the contact information for the system administrator as well as the name and
location of the switch. Also indicate the local time zone by configuring the appropriate
offset.
3. Click the “Refresh”