Barox Kommunikation RY-LGSP23-10G, Руководство пользователя

Страница: 182 / 383

barox Kommunikation
Publication date: Sept, 2015
Revision A1
171
2-16.2 Port Isolation
Port Isolation provides for an apparatus and method to isolate ports on layer 2 switches on
the same VLAN to restrict traffic flow. The apparatus comprises a switch having said plurality
of ports, each port configured as a protected port or a non-protected port. An address table
memory stores an address table having a destination address and port number pair. A
forwarding map generator generates a forwarding map which is responsive to a destination
address of a data packet. The method for isolating ports on a layer 2 switch comprises
configuring each of the ports on the layer 2 switch as a protected port or a non-protected
port. A destination address on an data packet is matched with a physical address on said layer
2 switch and a forwarding map is generated for the data packet based upon the destination
address on the data packet. The data packet is then sent to the plurality of ports pursuant to
the forwarding map generated based upon whether the ingress port was configured as a
protected or non-protected port.
This page is used for enabling or disabling port isolation on ports in a Private VLAN.A port
member of a VLAN can be isolated to other isolated ports on the same VLAN and Private
VLAN.
Web Interface
To configure Port Isolation configuration in the web interface:
1. Click Private VLAN, Port Isolation.
2. Evoke which port want to enable Port Isolation
3. Click Apply.
Figure 2-16.2: The Port Isolation Configuration
Parameter description:

Port Members :
A check box is provided for each port of a private VLAN. When checked, port isolation is
enabled on that port. When unchecked, port isolation is disabled on that port. By default,
port isolation is disabled on all ports.

Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved values.