Baroness LM66GC Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 85

Baroness LM66GC Скачать руководство пользователя страница 48

Effect 2:
Since the load of the grass catcher does not
affect the front roller, it is possible to reduce
sinking (gouging or digging) caused by the
front roller touching the ground when
entering the green.

3

4

2

1

4fx8ud-005

IGCA (Independent Grass Catcher Arm)_005

1

IGCA

2

Mower

3

Grass catcher

4

Front roller

Travel of Machine

Traveling the Machine

Warning

Do not start to move or stop the machine
abruptly.

Install traveling tires.
Flip up the stand.
Set the traveling/working selector lever to
"Travel ON" position of.
Start the engine.
Release the brake.
Release the safety lock and grip the main
clutch lever slowly.
The machine can start traveling.

1.
2.
3.

4.
5.
6.

7.

Cutting Work

Cutting Work

Warning

Do not start to move or stop the machine
abruptly.

Caution

Do not operate on a steep slope.

Caution

Be sure to operate at an appropriate speed for
the mowing site.
For mowing on an undulated surface, mow
with lowered cutting speed.

Caution

Be sure to attach the grass catcher.
Discharge the clippings at the right time during
operation.

Remove the traveling tires.
Flip up the stand.
Install the grass catcher.
Move the air adjusting plate to the desired
position.
Move the groomer clutch lever to the desired
position.
Make the traveling/working selector lever to
the "Reel ON" position.
Start the engine.
Release the brake.
Release the safety lock and grip the main
clutch lever slowly to start mowing.

Note:
The factory default maximum engine rotation
speed is set to 3,400 rpm.
Operate at about 3,000 rpm.

1.
2.
3.
4.

5.

6.

7.
8.
9.

LM56GC

・

LM66GC / LM66TC

Handling Instructions

Page 4-26

Travel of Machine

«
...
46
47
48
49
50
...
»

Содержание LM66GC






















































































Отзывы:

Нет отзывов