Baroness LM331, Руководство по эксплуатации для владельца, Страница: 64 / 103

Cutting Work
Cutting Work
Warning
Do NOT start to move or stop the machine
abruptly.
Caution
Cutting work must be performed at an
appropriate speed for the site and location.
When cutting over bumpy surfaces, keep the
engine rpm steady, and slow down the cutting
speed.
Caution
Reel rotation will be turned on or off based on
the sensor-detected position of the mower
units.
Please note that if you stop operating the
mower unit up/down lever before the mower
units are raised completely, reel rotation may
not stop.
Important
Mow with the lever shifted to the "DOWN"
position.
When the lever is returned to the neutral
position, the cylinders are fixed, preventing
mowing on undulations.
Important
Do NOT start to move or stop the machine
abruptly.
It will damage the hydraulic system or result in
oil leakage.
Shift the reel rotation/stop switching levers of
all mower units to the "Rotation" position.
Start the engine.
"Procedure to Start Engine" (Page 5-17)
Depress the brake pedal to release the
parking brake.
Shift the throttle lever to the "High speed"
position to run the engine at the maximum
speed.
Shift the mower unit up/down lever to the
"DOWN" position to lower the mower units. 1.
2.
3.
4.
5.
Set the reel rotation switch to the "Rotation"
position to rotate the reel cutters (cutting
cylinders) of all mower units.
Depress the traveling pedal to start cutting
work.
Removal/Installation of Grass Catcher
Caution
Stop the engine before removing or installing
the grass catcher.
Set the reel rotation switch to the "Stop"
position.
Lower the mower units.
Apply the parking brake.
Stop the engine.
Remove or install the grass catcher.
Removal of grass catcher:
Lift up the grass catcher, and remove the
mounting pins on the left and right of the grass
catcher from the grass catcher mounting
brackets.
Installation of grass catcher:
Install the mounting pins on the left and right
sides of the grass catcher into the grass
catcher mounting brackets.
Mower unit #1
2
2
3
1
3
bos35l-013
Removal/Installation of Grass Catcher_001
1 Grass catcher
2 Grass catcher mounting bracket
3 Mounting pin
6.
7.
1.
2.
3.
4.
5.
LM331
Handling Instructions
Page 5-20
Cutting Work