Baroness LM311, Руководство по эксплуатации для владельца

Страница: 52 / 85

Inspection Before Use
The purpose of the machine inspection is to:
Prevent accidents
Prevent damage to the machine
Maintain machine performance
Detecting machine malfunctions early helps
prevent unexpected problems from occurring.
If you detect any abnormalities with the
machine, immediately perform maintenance or
repairs.
Engine
Inspection of Engine Oil
Important
Securely tighten the oil level gauge and oil
filler cap.
Check the contamination of oil and engine oil
level to inspect the engine oil.
Inspect the engine oil level 10 to 20 minutes
after stopping the engine.
Place the machine to set the engine on the
level.
Stop the engine.
Pull out the oil level gauge.
2
1
72A470A5
Inspection of Engine Oil_001
1 Oil level gauge
2 Oil filler cap
Wipe the oil off the oil level gauge cleanly
with papers or cloths.
After wiping the oil off the oil level gauge,
check the remains of contamination.
Return the oil level gauge to its original
position, insert tightly, and pulling out again.
･
･
･
1.
2.
3.
4.
5.
6.
Check the engine oil level.
The appropriate oil level should be between
the upper and lower limit lines on the
gauge.
2
3
1
rnr453-002
Inspection of Engine Oil_002
1 Oil level gauge
2 Upper limit
3 Lower limit
Inspection of Fuel Quantity
With the machine on a level surface, observe
the fuel gauge on the fuel tank to check the
fuel level.
1
guc5f6-007
Inspection of Fuel Quantity_001
1 Fuel gauge
7.
LM311
Handling Instructions
Page 5-4
Inspection Before Use