21
•
Holds a program when pressed again—
HOLD light illuminates.
•
Cancels hold and continues running
when pressed again—HOLD light is off
and RUN light illuminates.
•
Exits a program when the button is held
down for two seconds—RUN and HOLD
lights are off.
•
At the end of a program the RUN light
will flash.
•
During holdback the HOLD light will flash.
PAGE button:
allows you to choose a parameter
from a list of parameters.
SCROLL button:
allows you to choose a param-
eter within a list of parameters.
UP button:
allows you to increase the value in
the lower display.
DOWN button:
allows you to decrease the value
in the lower display.
Controller Parameters
Home Display
°C:
measured temperature in Celsius.
Temperature units can not be changed without
entering the configuration. Contact Customer
Service if a different temperature unit is required.
OP:
% output power demand; displayed in lower
display (cannot be changed).
C.id:
Controller identification number.
8 S
EGMENT
& 4
X
16 S
EGMENT
P
ROGRAMMABLE
M
ODELS W
/OTP
