4
SECTION 2
SAFE OPERATION
BE ADVISED:
THE INSTRUCTIONS ON THIS AND THE FOLLOWING PAGE ARE PROVIDED
TO HELP USERS OPERATE THE UNIT SAFELY. FAILURE TO OBSERVE
THE PRECAUTIONS COULD CAUSE SEVERE PERSONAL INJURY.
READ OPERATION MANUAL BEFORE USING EQUIPMENT—FAMILIARIZE
YOURSELF WITH CONTROLS AND ACCESSORIES.
WHEN OPERATING THIS EQUIPMENT, ALWAYS WEAR PROTECTIVE
CLOTHING, GLASSES AND OTHER ACCESSORIES AS SPECIFIED BY THE
SAFETY REGULATIONS OF YOUR FACILITY.
DO NOT LEAVE EQUIPMENT UNATTENDED WHILE IT IS IN OPERATION.
DO NOT OPERATE EQUIPMENT WITH A DAMAGED ELECTRICAL CORD OR
ALLOW CORD TO COME INTO CONTACT WITH A HOT SURFACE. DO NOT
MODIFY CONSTRUCTION AND/OR ASSEMBLY OF EQUIPMENT. KEEP
GUARDS IN PLACE. DO NOT REMOVE TAGS, LABELS, DECALS OR OTHER
INFORMATION FROM THE UNIT.
DO NOT OPERATE EQUIPMENT IN AN EXPLOSIVE ATMOSPHERE.
DO NOT INSERT FINGERS INTO EQUIPMENT WHEN IT IS OPERATING.
MAKE SURE ALL VESSELS ARE SECURELY CLAMPED BEFORE TURNING
ON UNIT. DO NOT OPERATE THE SHAKER AT SPEEDS WHICH WILL
CAUSE THE CONTENTS OF VESSELS TO BE THROWN OUT. WHEREVER
POSSIBLE, VESSELS SHOULD BE STOPPERED TO PREVENT HAZARDOUS
SUBSTANCES BEING THROWN OUT DURING THE SHAKING ACTION.
USE EXTRA CAUTION WITH HOT OR VOLATILE SUBSTANCES, SO THAT
PRESSURE BUILD UP IN CONTAINER(S) DOES NOT CAUSE THE STOPPER
TO BLOW OFF. IF SHAKING ACTION WILL RESULT IN THE EVOLUTION OF
GASES OR FUMES, CARRY OUT THE OPERATION IN A WELL-VENTILATED
LABORATORY HOOD.
TO ELIMINATE HAZARD OF ELECTRICAL SHOCK, MAKE SURE FLOOR
AROUND MACHINE IS DRY. IN THE EVENT OF ACCIDENTAL SPILLING OR
SPLASHING OF LIQUIDS, CLEAN UP AND/OR NEUTRALIZE THE SPILLED
LIQUIDS BEFORE CONTINUING.
SAFE OPERATION:
(Con’t)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
