Barnstead International MIRAK 725 Series, Инструкция по эксплуатации и список запасных частей

Страница: 8 / 36

Set the unit on a flat stable surface at least 12" away from
combustible materials, and plug the cordset into a proper-
ly grounded electrical outlet of correct voltage and current
handling capacity. Use your right hand to locate the
ON/OFF power switch which is on the side, near the front
right corner as you face the unit. Press the black ON/OFF
power rocker switch into the ON position. The red LED
display(s), and the green power light to the left of the dis-
play(s) should illuminate. The unit is ready for operation.
8
Installation
Warning
Use a properly grounded electrical
outlet of correct voltage and current
handling capacity.
Do not remove or modify grounded
power plug. Use only properly ground-
ed outlets to avoid shock hazard. Not
rated for use in hazardous atmos-
pheres.
Do not use in the presence of flamma-
ble or combustible materials; fire or
explosion may result. This device con-
tains components which may ignite
such materials.
Do not use in highly corrosive atmos-
pheres; corrosive fumes and spill may
damage top and internal components,
creating shock hazard.
Note
Some misalignment of the motor bear-
ings in this product may have occurred
during shipping. Prior to using this
product, run the stirrer at maximum
speed for ten minutes to realign the
bearings.