Barnstead International MIRAK 725 Series, Инструкция по эксплуатации и список запасных частей

Страница: 3 / 36

Your Thermolyne MIRAK™ stirrer, hot plate, or stirring hot
plate has been designed with function, reliability, and
safety in mind. It is your responsibility to install it in con-
formance with local electrical codes.
Warnings
To avoid electrical shock, always:
1. Use a properly grounded electrical outlet of cor-
rect voltage and current handling capacity.
2. Disconnect from power supply before servicing.
To avoid personal injury:
1. Do not use in the presence of flammable or
combustible materials; fire or explosion may
result. This device contains components which
may ignite such materials.
2. Keep top surface clean. Use a non-abrasive
cleaner. Alkali spills, hydro-fluoric acid spills or
phosphoric acid spills may damage top and lead
to thermal failure. Unplug unit and remove spills
promptly. Do not immerse unit for cleaning.
3. Replace the top immediately if damaged by
etching, scratching or chipping. A damaged top
can break in use.
4. Do not remove or modify grounded power plug.
Use only properly grounded outlets to avoid
shock hazard. Not rated for use in hazardous
atmospheres.
5. Use caution when heating volatile materials; top
surface and element can reach the “Flash Point
Temperature” of many chemicals. These hot
plates and stirring hot plates are not explosion
proof. Fire or explosion may result. Unit contains
components which may ignite such materials.
6. Use appropriate hand and eye protection when
handling hazardous chemicals.
7. "Caution: Hot Surface. Avoid Contact." The hot
3
Safety Information
Warning
Warnings alert you to a possibility of
personal injury.
Caution
Cautions alert you to a possibility of
damage to the equipment.
Note
Notes alert you to pertinent facts
and conditions.
Alert Signals