background image

 

14

 
CARE AND MAINTENANCE  

Care of String 

The owners kit contains a tube of lube wax that should be 

applied to the center serving and flight track every 5 – 10 
shots. If the crossbow has been exposed to excessive moisture 

you may need to apply wax sooner. 
Apply lubewax to the center serving of string, rolling string 

forwards and backwards to ensure even application of wax.  
Apply lubewax to the flight track in order to extend string life 

and reduce friction. 

 
Keeping your Crossbow Peak Condition/Maintenance 

• 

Always store your crossbow in a safe, dry place.

 

• 

Do not expose your crossbow to extreme heat, such as 

closed, hot vehicles or near heat sources.

 

• 

Inspect string for signs of wear. String showing wear 

should be replaced immediately. 

 

• 

Periodically put a few drops of quality lightweight 

machine oil in the trigger mechanism.

 

• 

Keep the flight track and the string serving waxed, 

reducing friction.

 

• 

Your prod can be left strung indefinitely although we do 

not recommend that the bow be left in the cocked 

position for periods longer than four hours.

 

• 

When storing the crossbow for a long period of time it is 

recommended that the prod be unstrung.

 

 

With reasonable care of your equipment and diligent practice, 
your Crossbow will remain an accurate, highly efficient hunting 
weapon. 

 

 

 

 
 
 
 
 

Содержание RX150

















Отзывы: