4
DISCHARGE ..................
2” NPT, Vertical, Bolt-on Flange
LIQUID TEMP ................
104°F (40°C) Intermittent
MOTOR HOUSING ........
Cast Iron ASTM A-48, Class 30
VOLUTE .........................
Cast Iron ASTM A-48, Class 30
SEAL PLATE .................
Cast Iron ASTM A-48, Class 30
IMPELLER
Design
...........
2 Vane, Open with Pump out vanes
on Back side. Dynamically
balanced, ISO G6.3
Material
........
Cast Iron ASTM A-48, Class 30
SHAFT ............................
416 Stainless Steel
SQUARE RINGS ............
Buna-N
HARDWARE ..................
300 Series Stainless Steel
PAINT .............................
Air dry enamel, top coat
SEAL
Design
..........
Single Mechanical
Material
........
Rotating Faces - Silicon Carbide
Stationary Faces - Silicon Carbide
Elastomer - Buna-N
Hardware - 300 series stainless steel
CORD ENTRY ................
15 ft. (4.5m) Cord. Plug on 120 volt ,
Quick
connect.Custom molded for
sealing and strain relief
SPEED ...........................
1750 RPM, 60Hz (nominal)
UPPER BEARING:
Design
..........
Single Row, Ball, Oil Lubricated
Load
.............
Radial
LOWER BEARING:
Design
..........
Single Row, Ball, Oil Lubricated
Load
.............
Radial & Thrust
MOTOR:
Design
..........
NEMA L, Single phase,
Torque
Curve,
Oil Filled, Squirrel
Cage
Induction
Insulation
......
Class B
Class F on selected models
SINGLE PHASE .............
Permanent Split Capacitor (PSC)
Includes overload protection in motor
OPTIONAL EQUIPMENT:
Seal Material, Impeller Trims, Additional Cord
SECTION: A - PUMP SPECIFICATIONS:
inches
(mm)
SF, Single Seal
IMPORTANT !
1.)
DO NOT USE TO PUMP FLAMMABLE LIQUIDS
.
2.) NSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN
ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT
INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED
MEDIA IS A COMMON OCCURRENCE.
