4
Each BAFEZ break away fi tting consists of a cast iron
base elbow which is bolted to the fl oor of the wet well,
lower guide rail supports, cast iron movable elbow
(BAFEZCV’s include ball check valve and clean-out
cap), which is free to ride up and down the guide rails, A
sealing plate with o-ring seat, galvanized guide plate and a
stainless steel upper rail support.
The guide rails (supplied separately) are attached to the
base elbow at one end and to a stainless steel Upper Rail
support, which is attached to the underside of the wet well
cover at the other end. The guide rails serve only to guide,
they carry none of the pump weight. 3/4” (19mm) schedule
40 pipe should be used for guide rails.
An optional intermediate guide pipe bracket should be
used for depths of 13 feet (4M) or more.
The BAFEZ’s can basically be used on any pump with the
appropiate discharge size that does not exceed 200 lbs
(91kg) in weight, which do not generate in excess of 150
ft. Head (45 Meters).
The BAFEZ 3” is for pumps up to 200lbs, which do not
generate in excess of 150 ft. of head.
Quantity of One (1) each for Simplex and Two (2) for
Duplex.
Assemblies DO NOT include Pump, Discharge piping,
Guide Rails, Lifting Chain, nor Gate Valve with Handle.
(*) The 1.25 x 2 is supplied with an ultra close adapter.
Stainless Steel
Upper Rail Support
Lifting Chain Assembly:
Galvanized Steel, 10’ (3m) P/N: 100564
300 Stainless, 10’ (3m) P/N:
100563
300 Stainless, 15’ (4.6m) P/N:
101312
300 Stainless, 20” (6.1m) P/N:
101313
Must be ordered separately.
SECTION: A - SPECIFICATIONS:
