3. For BMV 32, 42, 65
Put the inlet & outlet chamber on the base plate, fit flanges on inlet & outlet chamber at two sides, and fit
the inducer.
Put the first impeller on the shaft, tighten the nuts and put the impeller on the neck ring base of inducer,
then put on the diffuser impeller, support diffuser, until the top diffuser, then fix all the diffuser with the
straps.
Shaft parts: fit the bottom sleeve, cover, washer on the shaft, tighten the bolts, fit bottom bearing on the
inlet & outlet chamber, fit washer. Then put the shaft parts on the inlet & outlet chamber, fit on O-ring,
lubricate the O-ring and then put on the cylinder.
Fit stay bolts on the base plate, then fit the O-ring, adjusting rubber, air vent gag on the pump head, and
put the pump head on the stay bolts, then put on the washer and tighten all the nuts.
Fit the mechanical seal on the pump head, then fit the seal cover, tighten the bolts, and the bolts in the
seal. Lift the shaft and insert the adjusting slice.
Fit the bracket and motor on the pump head.
Finally fit the coupling, tighten the bolts, and take out the adjusting slice. Rotate the coupling to ensure
that the shaft can rotate freely and not be choked.
Reverse the above process to disassemble a pump.
17
Assemble & disassemble
barmesapumps.com
